Screening Products: Dust Sealing Components for Vibrating Screens

Dust Sealing Cloth

Used for the containment of dust particles on vibrating screens and conveyor transfer points. Our dust cloth is manufactured for U.V. and heat resistance, has higher tear strength and durability. The cloth is clamped in place using a rubber extrusion called grip strip.

Dust sealing cloth is available 2mm thick, 1400mm wide and 20 meters long. The dust cloth can be cut to other widths in our factory, eg. 400mm wide.

Part Number MDC140

Standard dust cloth, 2mm thick, 1400mm wide, 20m long.

Grip Strip

Grip strip is a rubber extrusion used for the retention of the dust sealing cloth. The grip strip clamps the dust cloth over a 10mm round bar on the vibrating screen.

Supplied in 10 metre lenghts, shorter lengths can be supplied, eg. 1350mm long. For the retention of the dust cloth on the corners of the screen, corner pieces are available.

	Part Number MGS010 Grip Strip 20 metres long
	Part Number MGSS002 Grip Strip corner outside groove
	Part Number MGSS001 Grip Strip corner inside groove
	Part Number MGSS003 Grip Strip corner underside groove

Typical Arrangement

A typical arrangement for encapsulating dust using Minspec dust cloth and grip strip.

Top section of a screen 4mm plate           Minspec standard dust cloth (Part No MDC140)           Grip strip used to clamp the dust cloth over a 10mm steel bar (Part No MGS007)   Lower stationary part of screen